Awning mount - quick release

Why Diff Breather Kit

Differential Breather Relocation Kit keeps your differentials and gearbox safe during water crossings and deep puddles. 

By default, the rear axel differential breather is located directly on the axel itself; this means it's under the water during a river crossing or even in deep puddles.  

Moreover, the factory diff breather is often clogged and not functioning; when the diff is hot, air can't escape through the breather, and build-up pressure might cause the axel seal to fail. 

When the hot differential is rapidly cooled, it might also suck water through axles seals. 

The breather relocation kit is a cheap and easy upgrade that keeps your rig safe. 

After installation, your breather vents are over 43 inches from the ground vs. the factory rear axle 12 inches. 

Land Cruiser 120 Prado / Lexus GX470 Roof Shelf

Get more space in your trunk by getting access to space that without this product is wasted. 

You can store, blankets, ropes, pillows, jackets and much more stuff. 

No drilling is required, fits in place of 3rd-row grab handles. Easy to install. 

• Use bungee ropes or straps to attach light cargo under the shelf.  

Included in this set:

• shelf
• mounting brackets
• stainless steel hardware

Tools required to install it:

• phillips screwdriver
• hex head screwdriver
• 10 mm flat wrench or socket wrench

Perfect fit for:

• Land Cruiser 120 Prado
• Lexus GX 470 

Time required to install: ~15 min. 

Weight: 6 kg (13.2 lbs)

Shelf useful storage dimensions are 100x45cm. 

The battery bracket allows mounting an additional 65Ah battery in Lexus GX470. 

Material:

- 3 mm, laser-cut stainless steel

For Land Cruiser 120 Prado, please verify if there is space behind the air filter. Depending on the trim level, some LC120 ABS pump was located in this spot.

The battery dimensions  are 242x175x190 mm (LxWxH)

The table fits all cars with inner door trim wider than 104 cm (41 in);

Fits:

• Toyota Land Cruiser Prado 120
• Toyota Land Cruiser Prado 150
• Lexus GX 460
• Lexus GX 470
  
• FJ Cruiser
• Mitsubishi Pajero IV
• Land Rover Discovery 2

Features:

• Stainless steel top
• Front MOLLE Panel to hang pouches and accessories like an axe, knife, etc. 
• Solid auto-locking mechanism, easy to use
• Rattle-free design (industrial-grade rubber dumpers)
• Stainless steel limiters (no strings)
• Easy to install. 

Available sizes:

• M - tray surface area  104 x 28 cm (~41 x 11 in). DISCONTINUED
  

• L - tray surface area  104 x 35 cm (~41 x 14 in). (recommended for LC120/150; GX470/460; FJ Cruiser)

IMPORTANT:

Before you install the table, you should position it on the doors with closed trunk (to make sure the installation position is on the right height). 

Universal small molle panel

Dimensions: 200x275 mm

Material: Powder-coated steel

Color:Black

Secondary Molle Panel for Toyota FJ Cruiser

This panel is installed below the regular FJ Cruiser window molle panel. 

Perfect for air compressors, molle bags, fire extinguishers, axe, and more.

The final product is powder-coated black.

Stainless steel CB Radio Antenna mount

Material:

• Stainless steel powder coated 

Color:

• Black

Fits:

• Toyota Land Cruiser 120
• Lexus GX 470

Keep in close what you need most with under the seat accessories bracket.

Mount towing rope, fire extinguisher, ax and more.

Everything may come handy at crucial points of your overlanding experience.

Fits:

• Toyota Land Crusier 120
• Toyota FJ Cruiser
• Toyota 4Runner 4gen.
• Lexus GX 470

Set includes:

• bracket (black powder coating)
• stainless steel tubes
• mounting screws
• washers