Keep in close what you need most with under the seat accessories bracket.

Mount towing rope, fire extinguisher, ax and more.

Everything may come handy at crucial points of your overlanding experience.

Fits:

• Toyota Land Crusier 120
• Toyota FJ Cruiser
• Toyota 4Runner 4gen.
• Lexus GX 470

Set includes:

• bracket (black powder coating)
• stainless steel tubes
• mounting screws
• washers

The table fits all cars with inner door trim wider than 104 cm (41 in);

Fits:

• Toyota Land Cruiser Prado 120
• Toyota Land Cruiser Prado 150
• Lexus GX 460
• Lexus GX 470
  
• FJ Cruiser
• Mitsubishi Pajero IV
• Land Rover Discovery 2

Features:

• Stainless steel top
• Front MOLLE Panel to hang pouches and accessories like an axe, knife, etc. 
• Solid auto-locking mechanism, easy to use
• Rattle-free design (industrial-grade rubber dumpers)
• Stainless steel limiters (no strings)
• Easy to install. 

Available sizes:

• M - tray surface area  104 x 28 cm (~41 x 11 in). DISCONTINUED
  

• L - tray surface area  104 x 35 cm (~41 x 14 in). (recommended for LC120/150; GX470/460; FJ Cruiser)

IMPORTANT:

Before you install the table, you should position it on the doors with closed trunk (to make sure the installation position is on the right height). 

Why Diff Breather Kit

Differential Breather Relocation Kit keeps your differentials and gearbox safe during water crossings and deep puddles. 

By default, the rear axel differential breather is located directly on the axel itself; this means it's under the water during a river crossing or even in deep puddles.  

Moreover, the factory diff breather is often clogged and not functioning; when the diff is hot, air can't escape through the breather, and build-up pressure might cause the axel seal to fail. 

When the hot differential is rapidly cooled, it might also suck water through axles seals. 

The breather relocation kit is a cheap and easy upgrade that keeps your rig safe. 

After installation, your breather vents are over 43 inches from the ground vs. the factory rear axle 12 inches. 

Recovery points for:

• Land Cruiser Prado 120
• Lexus GX 470
• FJ Cruiser 2006-2009

Additional front recovery points. Direct fit in existing holes. On pre 2007 Prado it might be require to resize top mounting hole (13mm drill). 

Set includes:

• 2 x 12mm steel front tow points,
• 4 x bolts,
• 6 x flat washers,
• 2 x spring washers,
• 2 x teflon nuts.

Updated design, now you can put bow shackle through the recovery point. It's advised to use bow shackle in position shown on image. 

Bow shackle is not a part of this set.

IMPORTNT!

When recovering always hook to both points!

Rear Roof Shelf for Toyota Land Cruiser j80 and Lexus LX 450.

Get more space in your trunk by getting access to space that without this product is wasted. 
You can store, blankets, ropes, pillows, jackets and much more stuff. 

No drilling required, fits in place of 3rd row grab handles. Easy to install. 

Included in this set:

• shelf
• mounting brackets
• stainless steel hardware

Tools require to install it:

• phillips screwdriver
• hex head screwdriver
• 10 mm flat wrench or socket wrench

Perfect fit for:

• Land Cruiser j80
• Lexus LX 450

Time required to install: ~15 min. 

Shelf dimensions: 120x51 cm

Weight: 6.3 kg (13.9 lbs)

Sagged doors hinge fix.

Those shims fix issue with sagged door hinges in easy way. By placing shims under hinge you doors will close easier. 

Package content:

• 2 x 0.8mm shims (equivalent 0.0314in)

Fits:

• Lexus GX470
• Land Cruiser 120 Prado
• FJ Cruiser

Easy install

4Runner 5gen. roof shelf

Includes:

• Roof expedition shelf
• Stainless steel hardware

Features:

• Roof shelf allows extra gear storage, compact camping chairs, first aid kit, blankets, sleeping bags, etc.

Shelf dimensions:

• 45.7 x 15.75 in

Panels are required to mount the shelf - in the case of assembly with panels from other manufacturers, we do not guarantee fitment.

Fits Toyota Land Cruiser Prado j150 and Lexus GX 460

Product made from powder coated steel or aluminium.

Color: Black

The updated design has a new cutout, now you can put stuff behind the panel. It's even easier to install.