External MOLLE Panel GX460/LC150

The table fits all cars with inner door trim wider than 104 cm (41 in);

Fits:

• Toyota Land Cruiser Prado 120
• Toyota Land Cruiser Prado 150
• Lexus GX 460
• Lexus GX 470
  
• FJ Cruiser
• Mitsubishi Pajero IV
• Land Rover Discovery 2

Features:

• Stainless steel top
• Front MOLLE Panel to hang pouches and accessories like an axe, knife, etc. 
• Solid auto-locking mechanism, easy to use
• Rattle-free design (industrial-grade rubber dumpers)
• Stainless steel limiters (no strings)
• Easy to install. 

Available sizes:

• M - tray surface area  104 x 28 cm (~41 x 11 in). DISCONTINUED
  

• L - tray surface area  104 x 35 cm (~41 x 14 in). (recommended for LC120/150; GX470/460; FJ Cruiser)

IMPORTANT:

Before you install the table, you should position it on the doors with closed trunk (to make sure the installation position is on the right height). 

Fits Toyota Land Cruiser Prado j150 and Lexus GX 460

Product made from powder coated steel or aluminium.

Color: Black

The updated design has a new cutout, now you can put stuff behind the panel. It's even easier to install. 

Land Cruiser 150 / Lexus GX460 Roof Shelf

Get more space in your trunk by getting access to space that without this product is wasted. 

You can store, blankets, ropes, pillows, jackets and much more stuff. 

Fits in place of 3rd row seats handles. No drilling required. 

Included in this set:

• shelf
• mounting brackets
• stainless steel hardware

Tools require to install it:

• phillips screwdriver
• hex head screwdriver
• 10 mm flat wrench or socket wrench

Perfect fit for:

• Land Cruiser 150
• Lexus GX 460 

Time required to install: ~15 min. 

• FITRUB handles allow you to access the accessories you need in a fraction of a second.
• You can mount with our products (especially recommended with tables and universal wheel mount).
• FITRUB are rubber handles for easy and quick assembly and disassembly of oval and similar objects.
• Size indicated as diameter.
• Sizes 40-60 and 60-87 only contain one Fitrub per pack.

Ceiling shelf + cargo barrier for Land Cruiser 150 and Lexus GX 460. 

Easy install, no drilling or special tools required. 

Total weight ~8kg. 

It is made from powder-coated steel. 

Updated Design that allows use with soft shackles! 

Recovery points for:

• Land Cruiser Prado 150
• Lexus GX 460

Additional front recovery points. Direct fit in existing holes.

• 2 x 12mm steel front tow points,
• 6 x bolts,
• 8 x flat washers,
• 4 x spring washers,
• 2 x Teflon nuts.

Updated design, now you can put the bow shackle through the recovery point.

The bow shackle is not a part of this set.

IMPORTANT!

When recovering always hook to both points!

Installation video

Why Diff Breather Kit

Differential Breather Relocation Kit keeps your differentials and gearbox safe during water crossings and deep puddles. 

By default, the rear axel differential breather is located directly on the axel itself; this means it's under the water during a river crossing or even in deep puddles.  

Moreover, the factory diff breather is often clogged and not functioning; when the diff is hot, air can't escape through the breather, and build-up pressure might cause the axel seal to fail. 

When the hot differential is rapidly cooled, it might also suck water through axles seals. 

The breather relocation kit is a cheap and easy upgrade that keeps your rig safe. 

After installation, your breather vents are over 43 inches from the ground vs. the factory rear axle 12 inches. 

Bison Gear Patch. 

Diameter: 8 cm (3.15 in)

Velcro on the back side