Battery bracket GX470 / LC120

MOLLE compatible rear window panel.

• Fits Toyota Land Cruiser Prado 120 and Lexus GX 470
• Made from powder coated steel or aluminum. 

New design! Now all panels came with cut out to allow storing soft items between panel and window!

This product can be installed together with our net or ceiling shelf. 

Land Cruiser 120 Prado / Lexus GX470 Roof Shelf

Get more space in your trunk by getting access to space that without this product is wasted. 

You can store, blankets, ropes, pillows, jackets and much more stuff. 

No drilling is required, fits in place of 3rd-row grab handles. Easy to install. 

• Use bungee ropes or straps to attach light cargo under the shelf.  

Included in this set:

• shelf
• mounting brackets
• stainless steel hardware

Tools required to install it:

• phillips screwdriver
• hex head screwdriver
• 10 mm flat wrench or socket wrench

Perfect fit for:

• Land Cruiser 120 Prado
• Lexus GX 470 

Time required to install: ~15 min. 

Weight: 6 kg (13.2 lbs)

Shelf useful storage dimensions are 100x45cm. 

Two mounting options:

1. Directly over the factory net (using attached self tapping screws)
2. As a replacement for the factory net (using attached M5 bolts - require drilling)

This product fits:

• Toyota Land Cruiser 120 
• Lexus GX 470

Material:

• Black Powder Coated Aluminium

Flat design allows it to be mounted together with our drop down tables.

The table fits all cars with inner door trim wider than 104 cm (41 in);

Fits:

• Toyota Land Cruiser Prado 120
• Toyota Land Cruiser Prado 150
• Lexus GX 460
• Lexus GX 470
  
• FJ Cruiser
• Mitsubishi Pajero IV
• Land Rover Discovery 2

Features:

• Stainless steel top
• Front MOLLE Panel to hang pouches and accessories like an axe, knife, etc. 
• Solid auto-locking mechanism, easy to use
• Rattle-free design (industrial-grade rubber dumpers)
• Stainless steel limiters (no strings)
• Easy to install. 

Available sizes:

• M - tray surface area  104 x 28 cm (~41 x 11 in). DISCONTINUED
  

• L - tray surface area  104 x 35 cm (~41 x 14 in). (recommended for LC120/150; GX470/460; FJ Cruiser)

IMPORTANT:

Before you install the table, you should position it on the doors with closed trunk (to make sure the installation position is on the right height). 

Recovery points for:

• Land Cruiser Prado 120
• Lexus GX 470
• FJ Cruiser 2006-2009

Additional front recovery points. Direct fit in existing holes. On pre 2007 Prado it might be require to resize top mounting hole (13mm drill). 

Set includes:

• 2 x 12mm steel front tow points,
• 4 x bolts,
• 6 x flat washers,
• 2 x spring washers,
• 2 x teflon nuts.

Updated design, now you can put bow shackle through the recovery point. It's advised to use bow shackle in position shown on image. 

Bow shackle is not a part of this set.

IMPORTNT!

When recovering always hook to both points!

Sagged doors hinge fix.

Those shims fix issue with sagged door hinges in easy way. By placing shims under hinge you doors will close easier. 

Package content:

• 2 x 0.8mm shims (equivalent 0.0314in)

Fits:

• Lexus GX470
• Land Cruiser 120 Prado
• FJ Cruiser

Easy install

External Aluminium MOLLE Panel for Lexus GX470 and Land Cruiser j120 Prado 

New mounting bracket (one-piece)

Base panel is made from aluminium mounting brackets from stainless steel (powder coated black). 

This panel will fit most slim roof racks. 

Bottom part is attached with high quality suction pads. 

Hole patern fits RotoPax mounts. 

RotoPax mount and canister is not included. 

Why Diff Breather Kit

Differential Breather Relocation Kit keeps your differentials and gearbox safe during water crossings and deep puddles. 

By default, the rear axel differential breather is located directly on the axel itself; this means it's under the water during a river crossing or even in deep puddles.  

Moreover, the factory diff breather is often clogged and not functioning; when the diff is hot, air can't escape through the breather, and build-up pressure might cause the axel seal to fail. 

When the hot differential is rapidly cooled, it might also suck water through axles seals. 

The breather relocation kit is a cheap and easy upgrade that keeps your rig safe. 

After installation, your breather vents are over 43 inches from the ground vs. the factory rear axle 12 inches.