External Aluminium MOLLE Panel for FJ Cruiser

Base panel is made from aluminium mounting brackets from stainless steel. 

This panel will fit most slim roof racks. 

Bottom part is attached with high quality suction pads. 

Hole patern fits RotoPax mounts. 

RotoPax mount and canister is not included. 

Extension for Bison Gear FJ Cruiser Roof Rack

This product extends your Bison Gear Roof Rack by 45 cm. Thanks to it, you can easily store extra cargo on your roof, even with a roof top tent installed. 

It's made from CNC-cut and bent aluminum. 

Weight: 7 kg

Useful area: 1254 x 450 [mm]

Maximum load: 25 kg. 

Over 8000 km tests on and off-road with a 30+ kg load! 

Shipping starts October 21st.

FJ Cruiser roof shelf and window MOLLE panel set. 

This set includes:

• Roof expedition shelf
• Left window molle panel
• Right window molle panel
• Stainless steel hardware

Features:

• Roof shelf allows for storage of extra gear, compact camping chairs, first aid kit, blankets, sleeping bags, etc.
• MOLLE panels allow attaching pouches, tools, airlines, etc.
• Cut-in MOLLE panel allows you to use space behind the panel. You can store other gear like light jackets, towels, etc. 

Shelf dimensions:

• 130 x 37 cm (51 x 14.5 in)

NOTE: we offer different MOLLE Panel for cars equipped with subwoofer and cars without subwoofer

Lead time 3 weeks

FJ Cruiser Dash Pouch

Every FJ owner wonder how to use wasted space on the dash. Common solution is steel panel, but this might cause harm in case of accident. 

In Bison Gear we take safety seriously so this was not an option. 

Our solution is soft puch made from high quality fabric, water and rip resistant. Finally you can use extra space on your dash. 

Back of the pouch has plastic plate that stops it from sagging. Easy install with velcro tape (included). 

Easy to remove without a mark on the FJ dashboard. 

You can use it not only on FJ dash but on any flat surface 

The table fits all cars with inner door trim wider than 104 cm (41 in), it's a perfect fit for:

• Toyota Land Cruiser Prado 120
• Toyota Land Cruiser Prado 150
• Lexus GX 460
• Lexus GX 470
  
• FJ Cruiser
• Mitsubishi Pajero IV
• Land Rover Discovery 2

Features:

• Stainless steel top
• Front MOLLE Panel to hang pouches and accessories like an axe, knife, etc. 
• Solid auto-locking mechanism, easy to use
• Rattle-free design (industrial-grade rubber dumpers)
• Stainless steel limiters (no strings)
• Easy to install. 

Available sizes:

• M - tray surface area  104 x 28 cm (~41 x 11 in). 
  

• L - tray surface area  104 x 35 cm (~41 x 14 in). (recommended for LC120/150 GX470/460)

New features in this design of 104v2 vs the previous 108 table

• push pins are replaced by more durable lock
• strings are replaced by brushed stainless steel bars. 

FJ Cruiser trunk window MOLLE panel. 

Fits FJ Cruiser 2007-2020

Opening it allows placing additional cargo between the window and the panel. 

FJ Cruiser dash mounting bracket

• Non intrusive installation. Strong support for all your communication devices. 
• Easy install - no drilling. 
• USB charger as an option

Why Diff Breather Kit

Differential Breather Relocation Kit keeps your differentials and gearbox safe during water crossings and deep puddles. 

By default, the rear axel differential breather is located directly on the axel itself; this means it's under the water during a river crossing or even in deep puddles.  

Moreover, the factory diff breather is often clogged and not functioning; when the diff is hot, air can't escape through the breather, and build-up pressure might cause the axel seal to fail. 

When the hot differential is rapidly cooled, it might also suck water through axles seals. 

The breather relocation kit is a cheap and easy upgrade that keeps your rig safe. 

After installation, your breather vents are over 43 inches from the ground vs. the factory rear axle 12 inches.